ELM System - Locking System Units for Spring Loaded Handles

Ordering designations: 3000-U6-XX

Download Technical Documentation (359kB, Adobe PDF) 
 
Abstract

This solenoid unit is intended for an installation into spring-loaded handle systems. For controlling the unit a Handle Module is required (see tables below). The Locking System Unit lets at a triggered impulse the swing handle jump from the escutcheon so that it can be pressed. The integrated reed contact reports the current operation status of the handle (open/closed) to the connected Handle Module for further processing. The handle can be opened also from other operation modules or e.g. via LAN from a PC/Workstation or by means of a GSM phone.

Versions
3000-U6-00 The connection cable is intended for single wire connections to unencapsulated modules of housing version "KIT" (-00).
3000-U6-01 The connection cable is equipped with a specified plug for connecting encased modules of housing version "BOX" (-02) or 19 inch rack mount units.

 

See also (information becomes more general downwards):
Combination Handle Unit with Integrated Keypad
Handle module for 2 spring loaded handles
Handle module for 8 spring loaded handles
Components for door locking control - Overview
Components - Overview
ELM system - Overview

 

Technical Data

Release pulse

40V/5ms

Switching voltage of Reed contact (not 3000-U5)

? V

Switching current of Reed contact (not 3000-U5)

? A

Cable length

3 m

 

Connector/Cable

Signal

 Pin number of Plug (U06-01 only) Wire Color

Reed contact - Pin 1

 1

Green
Solenoid of Handle - Pin 1 2 Brown
Solenoid of Handle - Pin 2 3 Blue or White

Reed contact - Pin 2

 4

Yellow

 

The Locking System Unit 3000-U06-00 can be controlled by the following ELM Modules:

Name and ordering designation of Module

Handle Module for 8 Spring Loaded Handles 3000-U11-01

Handle Module for 2 Spring Loaded Handles 3000-U12-01

Click on a name of a module or rack for more information about the current technical version.

The Locking System Unit 3000-U06-01 can be controlled by the following ELM Modules or 19'' Rack Mount Units:

Name and ordering designation of Module/Rack

Handle Module for 8 Spring Loaded Handles 3000-U11-02

Handle Module for 2 Spring Loaded Handles 3000-U12-02

Standard Rack Mount Unit 3000-U50

  (The Locking System Unit is controlled by the internal:

   Handle Module for 8 Spring Loaded Handles 3000-U11-01)

Extended Rack Mount Unit 3000-U53

  (The Locking System Unit is controlled by the internal:

   Handle Module for 8 Spring Loaded Handles 3000-U11-01)

 

Click on a name of a module or rack for more information about the current technical version.

 

The Locking System Unit 3000-U06-XX can be used with these handles:

Program: 1151

More information

Program: 1180

More information

Program: 2100

More information

Please order the handle systems “prepared for reed contact”. For other handle systems, please, contact EMKA.