Technical designation of hardware version: H1m15v1e2
Technical designation of last firmware revision: S1m15a2v3
Ordering designation: 3000-U09-XX
Note: This new module replaces the following old module:
|
|
|
| Abstract | ||||||||
 The module implements a Operating component (1 Proximity Reader). The module is a card reading station which allows for opening of handles upon permission by proximity cards (LEGIC®-System). Reading of such a card is realized contactlessly using an antenna. The ELM system stores a list of up to 1000 card entries which are authorized to open handles. Every entry of this list is indicated by an ID number. The Proximity reader component reads the data of a card which a user holds in front of a antenna. From these data the component calculates an ID number according to certain rules. The ELM system searches for this ID number in the list of card entries. If a fitting list entry is found, the data assigned to this entry is evaluated. The data may consist of a handle number. In this case the corresponding handle or latch will be opened immediately. Alternatively, a code number can be assigned to a list entry. In conjunction with the Keypad Module 3000-U08-XX the locking to be opened can be selected. It is possible to confine the number of permitted uses as well as to define an expiry date. The operation parameters can be adapted or changed any time by software from a PC. The rules according to which a Proximity reader component forms the ID number from the read data are flexible. They are an issue of configuration. If more than one Proximity reader component is installed in an ELM system, that configuration can be different for each of the readers. These customization possibilities allow the optional reuse of already existing cards or badges of a third party system.
Housing Versions
Note: This module replaces the older Module H1m9v1e1. |
||||||||
|
See also (information becomes more general downwards):
|
| Peripheral devices and accessories | ||||
|
Peripherals and accessories for the Proximity Reader Component |
||||
|
Proximity antenna Flat antenna for connection to a Proximity Reader Component. The user holds the card in front of the antenna. There is no need of physical contact between the card and the antenna. The antenna will be delivered with a front-mountable enclosure. The cable (3 meters) with BNC plug for connection to the Proximity reader component, mounting accessories and installation instructions are included. Customer specific covers (logo, etc.) are possible. Other forms of antenna or cable lengths on demand. Ordering designation: on inquiry; (included in delivery set) |
|||
|
Proximity cards Smart cards with no visible module that communicates by means of a radio frequency signal (LEGIC®-System). Customer specific layouts (logo, etc.) are possible. Other forms of contactless media on demand. Ordering designation: on inquiry; (2 cards included in delivery set)
|
|||
|
Peripherals and accessories for the module base platform |
||||
|
Power supply unit 12V DC, 700mA stabilized The module acts as a power feeding point of the ELM system if a power supply unit is connected. Ordering designation: 3000-U03-XX
|
|||
|
CAN/Power cable for connecting "KIT"-modules Cable with CAN-plugs at both ends for connecting two "KIT"-housing versions of ELM modules. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (0,20 meters): 3000-U17 Ordering designation (3,00 meters): 3000-U18 Ordering designation (5,00 meters): 3000-U19
|
|||
|
CAN/Power cable for connecting "KIT"-modules to "BOX"-modules or to 19 inch Racks Cable with one CAN plug and one RJ11 plug for connecting a "KIT"-housing version of an ELM module to a "BOX"-housing version of a module or to an ELM 19 inch Rack Mount Unit. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (3,00 meters): on inquiry Ordering designation (5,00 meters): on inquiry
|
|||
|
Patch-Cable Straight-Through 2x RJ45 Patch cable with straight-through wiring for CAN bus chaining of racks and "BOX"-housing versions of modules. Ordering designation: on inquiry
|
|||
The
delivery set includes installation instructions, a
Proximity antenna and two
Proximity cards. These accessories are described below.
