Technical designation of hardware version: H1m14v3e1
Technical designation of last firmware revision: S1m14a2v111
Ordering designation: 3000-U14-XX
| Abstract | ||||||||
 The module implements a Communication component and 2 Switching Components. The communication module 3000-U14 is the central processor module of an ELM system. Furthermore, it provides interfaces to PC/Workstations. An Ethernet network interface as well as an serial RS 232 interface is provided. The data memory of the module holds the system configuration of the ELM system. Depended on alarm conditions, 2 relays with switch over contacts are powered. LED's gives visual feedback about the state of the module. |
||||||||
|
Housing Versions
See also (information becomes more general downwards):
|
| Connectable devices and accessories are: | ||||
|
Actors for the Switching Components
As a reaction of activating/deactivating an alarm line, an assigned relay is switched over. They have both a switch over contact which can switch up to 0,5A at 125 V AC / 1A at 30V DC. A connectable unit for switching mains power is available. |
||||
|
Switched socket outlet Electrical outlet unit with a relay contact that switches mains power on/off for plugged devices. It is used as an amplifier for Relay Output Components of ELM modules. Ordering designation: 3000-U41-XX
|
|||
|
Peripherals and accessories for the Communication Component and the module base platform |
||||
|
CAN/Power cable for connecting "KIT"-modules to "BOX"-modules or to 19 inch Racks Cable with one CAN plug and one RJ11 plug for connecting a "KIT"-housing version of an ELM module to a "BOX"-housing version of a module or to an ELM 19 inch Rack Mount Unit. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (3,00 meters): on inquiry Ordering designation (5,00 meters): on inquiry
|
|||
|
CAN/Power cable for connecting "KIT"-modules Cable with CAN-plugs at both ends for connecting two "KIT"-housing versions of ELM modules. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (0,20 meters): 3000-U17 Ordering designation (3,00 meters): 3000-U18 Ordering designation (5,00 meters): 3000-U19
|
|||
|
RS232-cable Null-modem cable for connecting the module to a PC. Needed for initial configuration of the ELM-System. Ordering designation: 3000-U29
|
|||
|
Patch-Cable Crossover 2x RJ45 Cable for connecting the Communication component directly (that means without a hub or switch) to a Ethernet-LAN socket of a PC/Workstation. Ordering designation: 3000-U28
|
|||
|
Patch-Cable Straight-Through 2x RJ45 Patch cable with straight-through wiring for connecting the Communication component to a Ethernet-Hub or Switch. Furthermore, straight-through patch cables are used for CAN bus chaining of racks and "BOX"-housing versions of modules. Ordering designation: on inquiry
|
|||
