Technical designation of hardware version: H1m11v2e1
Technical designation of last firmware revision: S1m11a2v7
Ordering designations: 3000-U11-XX
Note: This new module replaces the following old module:
|
|
|
| Abstract | ||||||||
 The module provides 8 Components for door locking control (8 Spring Loaded Handle Controllers). It generates current pulses for the peak releasing of the handles. If a connected handle contains a Locking System Module with a Reed Contact, the state of the handle (opened/closed) will be reported. Alarms can be generated. Instead of a handle a Flat Reed Contact can be connected to a controller for door monitoring. Note: This module replaces the older Module H1m11v1e1. |
||||||||
|
Housing Versions
See also (information becomes more general downwards):
|
| Peripheral devices and accessories | ||||
|
Peripherals and accessories for the Handle Controller Components |
||||
|
Locking System Unit with indication of operation status (with Reed Contact) Ordering designation: 3000-U06-XX
|
|||
|
Flat Reed Contact A Flat Reed Contact used as a door switch may be connected to a Handle Controller Component instead of a Locking System Module with Reed Contact. Ordering designation: 3000-U35-XX
|
|||
|
Prolongation cable for peripherals For prolongation of the connection cable of handles, latches, sensors or actors for connecting a "BOX"- housing version of a Module or a 19 inch Rack Ordering designation (2 meters): on inquiry Ordering designation (5 meters): on inquiry
|
|||
|
Peripherals and accessories for the module base platform |
||||
|
Power supply unit 12V DC, 700mA stabilized The module acts as a power feeding point of the ELM system if a power supply unit is connected. Ordering designation: 3000-U03-XX
|
|||
|
CAN/Power cable for connecting "KIT"-modules Cable with CAN-plugs at both ends for connecting two "KIT"-housing versions of ELM modules. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (0,20 meters): 3000-U17 Ordering designation (3,00 meters): 3000-U18 Ordering designation (5,00 meters): 3000-U19
|
|||
|
CAN/Power cable for connecting "KIT"-modules to "BOX"-modules or to 19 inch Racks Cable with one CAN plug and one RJ11 plug for connecting a "KIT"-housing version of an ELM module to a "BOX"-housing version of a module or to an ELM 19 inch Rack Mount Unit. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (3,00 meters): on inquiry Ordering designation (5,00 meters): on inquiry
|
|||
|
Patch-Cable Straight-Through 2x RJ45 Patch cable with straight-through wiring for CAN bus chaining of racks and "BOX"-housing versions of modules. Ordering designation: on inquiry
|
|||
|
The Locking System Unit above (3000-U6-XX) can be used with these handles: |
||||||||
|
|
|
||||||
|
Program: 1151
|
Program: 1180
|
Program: 2100
|
||||||
