|
|
Download Technical Documentation U49 (Front) (93kB, Adobe PDF) |
Technical designation of hardware version: D1r2e53
Ordering designation: 3000-U53
|
| Abstract | ||||||||||||||||||
An ELM Rack Mount Unit has a space requirement within the cabinet of 1 Unit only. All external device units are plugged into sockets. The housing consists of a modular aluminum construction. The Rack Mount Unit 3000-U53 provides the functional components listed in the table below by means of the equipped modules. The modules are mounted and wired to the housing. The rack unit contains a built-in power supply 100-240V AC, 47-63Hz, which can supply the internal modules and additional external modules and accessories.
Click on a name of a module for more information about the current technical version of that module.
The 3000-U53 is a Master Rack due to the included Communication component. This means, that this rack is fully able to work as a single ELM system. Additional connected modules may extend the system, but they are not required.
Appropriate connectors for the LAN and additional equipment, like further racks, single modules of housing versions "BOX"/"KIT", or sensors and actors, can be found at the rear of the rack. The front includes the RS232 interface socket for service/set up purposes, the on/off switch and corresponding LEDs which show the operating status of the internal modules.
The rack will be delivered complete with installation instructions and mains power cable.
See also (information becomes more general downwards):
|
| Peripheral devices and accessories | ||||
|
The image to the left gives an example of what can be connected to the rack. All peripheral devices and accessories available are described below. | |||
|
Peripherals and accessories for the Proximity Reader Component |
||||
|
Proximity antenna with cable for connecting to an ELM module or to an ELM 19 inch rack Flat antenna for connection to Proximity reader components. The user holds the card in front of the antenna. There is no need of physical contact between the card and the antenna. The antenna will be delivered with a front-mountable enclosure. The cable (3 meters) with BNC plug for connection to the Proximity reader component, mounting accessories and installation instructions are included. Customer specific covers (logo, etc.) are possible. Other forms of antenna or cable lengths on demand. Ordering designation: on inquiry; (included in delivery set of 3000-U53) |
|||
|
Proximity cards Smart cards with no visible module that communicates by means of a radio frequency signal (LEGIC®-System). Customer specific layouts (logo, etc.) are possible. Other forms of contactless media on demand. Ordering designation: on inquiry; (2 cards included in delivery set of 3000-U53)
|
|||
|
Peripherals and accessories for the Handle Controller Components |
||||
|
Locking System Unit with indication of operation status (with Reed Contact); with cable and plug for connecting to an ELM 19 inch rack Ordering designation: 3000-U06-01
|
|||
|
Flat Reed Contact used as door switch A Flat Reed Contact used as a door switch may be connected to a Handle Controller Component instead of a Locking System Module with Reed Contact. Ordering designation: 3000-U35-01
|
|||
|
Prolongation cable for peripherals For prolongation of the connection cable of handles, latches, sensors or actors for connecting a "BOX"- housing version of a Module or a 19 inch Rack Ordering designation (2 meters): on inquiry Ordering designation (5 meters): on inquiry
|
|||
|
Sensors for Sensor Input Components
Sensor Input Components of the ELM system are generic. No special sensors or interface controller are required and there is no dependence of a specific manufacturer. Any simple transducer that can produce 0 – 7.5V DC can be used. In addition, several specific sensors are provided. These are listed in the following table. |
||||
|
Temperature Sensor with cable and plug for connecting to an ELM 19 inch rack Measuring range temperature: -50..+150 °C / -58..302 °F Ordering designation: 3000-U39-01
|
|||
|
Smoke Detector with with cable and plug for connecting to an ELM 19 inch rack Photoelectronic smoke detector for the early detection of fires with clear smoke development. Conventional smoke detector without switch-on-control, with alarm latch and alarm indicator. Approval: VDS, LPCB, CNBOP Actions are defined by assigning relay components or alarms and setting proper thresholds. Ordering designation: 3000-U34-01
|
|||
|
Acceleration/Tilt Sensor with cable and plug for connecting to an ELM 19 inch rack It is used to detect vandalism, destruction and theft. The sensor measures acceleration along one axis. Actions are defined by assigning relay components or alarms and setting proper thresholds. Ordering designation: 3000-U38-01
|
|||
|
Mains voltage sensor with cable and plug for connecting to an ELM 19 inch rack Actions are defined by assigning relay components or alarms and setting proper thresholds. Ordering designation: 3000-U40-01
|
|||
|
Flat Reed Contact used as digital sensor Can be used as a digital sensor, e.g. for door monitoring. Ordering designation: 3000-U35-01
|
|||
|
Actors for Switching Components
As a reaction of exceeding or falling below a set point of the Sensor Input Component, the Relay Output Component can be switched on if it is assigned to a set point. The relay has a switch over contact which can switch up to 0,5A at 125 V AC / 1A at 30V DC. A connectable unit for switching mains power is available. |
||||
|
Switched socket outlet; with cable and plug for connecting to an ELM 19 inch rack Electrical outlet unit with a relay contact that switches mains power on/off for plugged devices. It is used as an amplifier for Relay Output Components of ELM modules or racks. Ordering designation: 3000-U41-01
|
|||
|
Peripherals for Sensor Input Components as well as for Switching Components |
||||
|
Switched socket outlet with observation of mains power; with cable and plug for connecting to an ELM 19 inch rack Electrical outlet unit with a relay contact that switches mains power on/off for plugged devices. It is used as an amplifier for Relay Output Components of ELM modules. In addition, a sensor for observation of mains voltage is contained which can be connected to a Sensor Input Component. Actions are defined by assigning Relay Output Components or alarms and setting proper thresholds. Ordering designation: 3000-U42-01
|
|||
|
Y-Splitter cable for connecting sensors/actors to a 19 inch Rack Ordering designation: on inquiry
|
|||
|
Prolongation cable for peripherals For prolongation of the connection cable of handles, latches, sensors or actors for connecting a "BOX"- housing version of a Module or a 19 inch Rack Ordering designation (2 meters): on inquiry Ordering designation (5 meters): on inquiry
|
|||
|
Peripherals and accessories for the Communication Component and the rack base platform |
||||
|
CAN/Power cable for connecting "KIT"-modules to "BOX"-modules or to 19 inch Racks Cable with one CAN plug and one RJ11 plug for connecting a "KIT"-housing version of an ELM module to a "BOX"-housing version of a module or to an ELM 19 inch Rack Mount Unit. The cable is for CAN-Bus signal transmission as well as for power supply. Several standard lengths are available. Other lengths on demand. Ordering designation (3,00 meters): on inquiry Ordering designation (5,00 meters): on inquiry
|
|||
|
RS232-Cable Null-modem cable for connecting the rack to a PC. Needed for initial configuration of the ELM-System. Ordering designation (3 meters): 3000-U29
|
|||
|
Patch-Cable Crossover 2x RJ45 Patch cable with crossover wiring for connecting the rack directly to a PC/Workstation via Ethernet-LAN. Ordering designation: 3000-U28
|
|||
|
Patch-Cable Straight-Through 2x RJ45 Patch cable with straight-through wiring for connecting the Communication component to a Ethernet-Hub or Switch. Furthermore, straight-through patch cables are used for CAN bus chaining of racks and "BOX"-housing versions of modules. Ordering designation: on inquiry
|
|||
|
The Locking System Unit above (3000-U06-01) can be used with these handles: |
||||||||
|
|
|
||||||
|
Program: 1151
|
Program: 1180
|
Program: 2100
|
||||||
